Page 2 of 2
Re: Unleashed does not trigger timelapse in bulb mode
Posted: February 14th, 2024, 12:03 pm
by pazoulay
Hi Oliver, this is great news!
Looking forward to the firmware update. I did manage to reconnect everything (but would be great to have a guide that spells things out from beginning to end) as you saw from the video I posted on the other thread.
Regards,
Pierre
Re: Unleashed does not trigger timelapse in bulb mode
Posted: February 19th, 2024, 3:38 pm
by pazoulay
Oliver, might you know when we can expect the firmware update?
Regards,
Pierre
Re: Unleashed does not trigger timelapse in bulb mode
Posted: February 20th, 2024, 2:19 am
by Oliver
We just published it!
Re: Unleashed does not trigger timelapse in bulb mode
Posted: February 21st, 2024, 1:04 am
by pazoulay
Oliver, I want to confirm that the latest firmware update solves the issue. I am thrilled. Hoping for some clear nights to test on real stars as opposed to my home office.
I have a follow-up question.
The timelapse mode gives some weird and uninformative indication of the time remaining (or at least it does not make intuitive sense, but I am willing to have my intuition changed).
https://www.dropbox.com/scl/fi/bpasgoyx ... yvdix&dl=0
In the example above, I had set a series of three shots of 40 seconds each, with a 42 second interval. So the whole thing should take 42+42+40=124 seconds (2 minutes and 4 seconds).
The time indicated for the whole sequence is 2:00+m. Not sure what m means (minutes?) but that seems close enough. But during the last shot, instead of saying 40 seconds left and then counting down to 0, it just says "0+y remaining." What is y?
Anyway, it's not a big problem and certainly is not hampering usability of the device. But I would love to understand better.
Thanks again!
Best,
Pierre
