Unleashed triggers two shots in continuous-high mode

We tested as good as we can. But there will always be things we didn't find. If you found things that apparently don't work as they should, you can report them here so we can take care of them as soon as possible.
Post Reply
tophee
Posts: 6
Joined: June 9th, 2019, 1:00 pm

June 9th, 2019, 1:21 pm

When my D750 is set to continuous high speed shooting mode (CH), a single tap on the unleashed trigger always takes two pictures. Is this intentional? I would consider it a bug.
Oliver
Posts: 1127
Joined: October 9th, 2018, 4:17 pm

June 17th, 2019, 11:21 am

On older cameras, this is expected, since we don't get the info from the camera that a photo was taken - so the Unleashed just "presses the shutterbutton" for 1 second, which can mean up to 8 photos, depending on camera.

But on newer cameras, of which the D750 is definitely one, we do get the info, and release the shutterbutton as soon as we get that info.
I was just able to reproduce the issue on another camera, and we'll have a look at it soon.
Founder & CEO of Foolography, Hardware & Firmware developer.
Gasper
Posts: 4
Joined: October 5th, 2018, 9:35 am

June 17th, 2019, 2:56 pm

Hello tophee,

Could you please verify which firmware version your Unleashed has? You can find it by going in `YOUR UNLEASHEDS`, tapping on the Unleashed and on Firmware afterward.

Thank you and sorry for your inconvenience, we're working on fixing it.
Gasper
Firmware & Android developer at Foolography
tophee
Posts: 6
Joined: June 9th, 2019, 1:00 pm

June 17th, 2019, 10:54 pm

I'm not sure how to interpret the firmware information but it says:

Firmware version:
A 1.3.2
B 1.3.1
C 1.3.0
Oliver
Posts: 1127
Joined: October 9th, 2018, 4:17 pm

June 17th, 2019, 11:43 pm

That's exactly the info we need, thanks.
Founder & CEO of Foolography, Hardware & Firmware developer.
Post Reply