Page 1 of 1

Unleashed triggers two shots in continuous-high mode

Posted: June 9th, 2019, 1:21 pm
by tophee
When my D750 is set to continuous high speed shooting mode (CH), a single tap on the unleashed trigger always takes two pictures. Is this intentional? I would consider it a bug.

Re: Unleashed triggers two shots in continuous-high mode

Posted: June 17th, 2019, 11:21 am
by Oliver
On older cameras, this is expected, since we don't get the info from the camera that a photo was taken - so the Unleashed just "presses the shutterbutton" for 1 second, which can mean up to 8 photos, depending on camera.

But on newer cameras, of which the D750 is definitely one, we do get the info, and release the shutterbutton as soon as we get that info.
I was just able to reproduce the issue on another camera, and we'll have a look at it soon.

Re: Unleashed triggers two shots in continuous-high mode

Posted: June 17th, 2019, 2:56 pm
by Gasper
Hello tophee,

Could you please verify which firmware version your Unleashed has? You can find it by going in `YOUR UNLEASHEDS`, tapping on the Unleashed and on Firmware afterward.

Thank you and sorry for your inconvenience, we're working on fixing it.

Re: Unleashed triggers two shots in continuous-high mode

Posted: June 17th, 2019, 10:54 pm
by tophee
I'm not sure how to interpret the firmware information but it says:

Firmware version:
A 1.3.2
B 1.3.1
C 1.3.0

Re: Unleashed triggers two shots in continuous-high mode

Posted: June 17th, 2019, 11:43 pm
by Oliver
That's exactly the info we need, thanks.