kein deep sleep mode bei N1 und N2

Bugs and Issues only for the Beta version of our apps and firmware
Locked
ubecker
Posts: 6
Joined: January 16th, 2021, 7:57 pm

September 25th, 2021, 8:58 pm

Hallo,
Firmware Version
A 2.0.0 Beta 209
B Beta 135
C Beta 178
Iphone SE
ich habe meine N1 und N2 an Z6 und D850 für meine Bedürfnisse ausreichend testen können.
Einen entscheidenden Fehler kann ich melden.
N1 und N2 saugen den Akku im ausgeschalteten Zustand zu schnell leer.
Wie auch Unfoolishly in dem Beitrag Battery drainage caused by the new BETA 2.0.0 schreibt.
Hinzufügen möchte ich das das nur geschieht wenn die Kamera benutzt wurde und dann ausgeschaltet wird, und dann nicht mehr benutzt wird.
Das Leersaugen des Akkus kann man verhindern wenn man nach dem Ausschalten der Kamera den Akku für einige Sekunden entfernt. (oder das N1 / N2 kurz von der Kamera entfernt)
Es sieht danach aus als wenn kein deep sleep mode entsteht.
Gruß Udo
Gruß Udo
Unfoolishly
Posts: 293
Joined: June 24th, 2020, 2:43 am

September 25th, 2021, 10:31 pm

Hi All,

Thanks for backing me up on this one Udo :)

It seems that something is not going as planned in the Unleashed firmware, and I think/assume it has to do with the states the Unleashed switches into and gets out off. IDLE mode is probably causing the battery drainage. At least, that is how it looks to me.
The new design of the 2.0.0 looks good in theory, but in practice (that is: implementation) it is not yet out of the childhood illness phase. Too many bugs, too many problems.
I don't mind there is a bug or a problem, but I do mind a bad implementation of a new design. To me it looks like the design is well thought out, but the implementation is not followed as the design describes. But that is my wild guess...

Oliver, Andy, please check and recheck all stages and process steps, I think you have missed out or overlooked some important thing in the code.

And you see now: I am not the only one with this problem (IDLE mode) anymore (but I was the first mentioning it!). Many more will follow is my guess, unless you find that bug or implementation error sooner than your customers start complaining about it.

Happy holiday, because I am offline any moment soon :-)

Greetings,
Unfoolishly
Retired customer of the Unleashed. I have given up on this project, it's a never-ending story of bugs. Goodbye everyone!
ubecker
Posts: 6
Joined: January 16th, 2021, 7:57 pm

September 26th, 2021, 4:40 pm

diesen Fehler hatte ich vor einiger Zeit schon bemängelt. Interessant ist das vor der Beta Version der N1 mit der Nikon D850 das nicht hatte. Der N2 mit der Z6 aber schon,
Jetzt haben es beide.

Gruß Udo
Gruß Udo
Oliver
Posts: 1127
Joined: October 9th, 2018, 4:17 pm

September 27th, 2021, 12:02 pm

Hallo Udo,

vielen Dank für die Meldung.
Auch wenn wir schon viel Zeit in das Thema investiert haben, werden wir es uns nochmal vorknöpfen, da dies natürlich so nicht sein darf.
Vielen Dank auch für den Hinweis, dass es nach dem Akku entfernen nicht auftritt, das könnte dabei helfen an der richtigen stelle zu suchen.

Wie sind denn deine Einstellungen bei den Sleep und Deepsleep Timeouts?
Founder & CEO of Foolography, Hardware & Firmware developer.
ubecker
Posts: 6
Joined: January 16th, 2021, 7:57 pm

September 27th, 2021, 9:07 pm

Hallo Oliver
Der deep sleep steht auf System off und der timeout auf 10m so wie es aus der Installation kommt. Ich habe dort nichts geändert.

Gruß Udo
Gruß Udo
Oliver
Posts: 1127
Joined: October 9th, 2018, 4:17 pm

September 28th, 2021, 9:50 am

Vielen Dank!
Dann schauen wir uns das nochmal genauer an.
Founder & CEO of Foolography, Hardware & Firmware developer.
Locked