I can not connect he Unleashed

We tested as good as we can. But there will always be things we didn't find. If you found things that apparently don't work as they should, you can report them here so we can take care of them as soon as possible.
Post Reply
CatLand
Posts: 1
Joined: May 1st, 2019, 7:57 pm

May 1st, 2019, 8:10 pm

Hi,

I cannot connect the Unleashed.
Bluetooth is ON, of course, so is the camera, but the app cannot detect it.
THe Unleashed is plugged all the way.
I can pair the device throught the Bluetooth settings of the cellphone in a second BUT I can't connect it.
I have a Nikon D7200 and a OnePlus 6 phone with Android 9.
The app is stuck in the searching screen.
I did all the resets possible.
The LED on the device switches from yellow to red.

I don't know what else can I try. Any ideas?

Thanks.

Jordi
Oliver
Posts: 277
Joined: October 9th, 2018, 4:17 pm

May 21st, 2019, 11:10 am

Hi Jordi

Sorry, I must have missed your post.
I hope you have found the issue by now, but if not for you then for anyone else looking at this post:

Check out our support videos:
https://www.foolography.com/support/unleashed/

specifically these two:
https://www.foolography.com/faqs/how-do ... correctly/
https://www.foolography.com/faqs/how-do ... martphone/

We also noticed that quite a few people are waiting while the App is still searching for Unleasheds, even though the first one is already shown on the screen. Usually Unleasheds are found almost instantly, so you might not have noticed the first one being found at all. However, since you can pair multiple Unleasheds, the app keeps searching for more Unleasheds indefinitely.
Just tap on the found Unleashed(s) to pair, and then tap done to get started.

I hope this helps!
Founder & CEO of Foolography, Hardware & Firmware developer.
Post Reply