Auto Exposure Ramped Timelapse: The Holy Grail “Holy Grail” timelapse is the name for day-to-night or night-to-day timelapses. For timelapses like these, the exposure needs to be adjusted continuously as the lighting conditions slowly change. Since you can’t (or rather shouldn’t) touch the camera while shooting a timelapse and you want to minimize flickering, external […] Read more…
Timelapse 1. The top area of the screen shows a summary of the camera’s current settings. You can change those settings by tapping on that area to see the detailed camera settings. 2.In the center area you can set the interval i.e. in what frequency a photo should be taken, and the duration i.e. for […] Read more…
Photo Review 1. Tap the photo review icon at the bottom right of the screen to configure photo review settings. With the switch you can turn photo review on and off. 2. If this feature is activated, a small thumbnail version of the photo is downloaded. This lets you quickly check framing and exposure. 3. […] Read more…
Geotagging 1. Tap the satellite icon at the bottom right of the Control Center to configure Geotaggingsettings. There are three pickers/columns. 2. The first picker lets you turn Geotagging on or off. Depending on the camera you might as well be able to choose what source for the GPS coordinates should be used. 3. The […] Read more…
Photo Mode 1. In every mode the trigger button is in the bottom center so you’re always able to take a photo. 2. To change the camera’s settings, just tap the settings you want to adjust. Scroll the picker to select the value you want – values will be updated in the camera immediately. 3. […] Read more…
Pairing multiple Unleasheds 1. You can manage your Unleasheds in the “YOUR UNLEASHEDS” screen. To get there, tap the Unleashed settings icon at the bottom of the app’s menu. 2. In this screen, the app is continuously searching for Unleasheds. Just tap on each Unleashed you want to pair. If the pairing was successful, the […] Read more…
Disable and unpair your UNLEASHED Disconnect/Manually Disable 1. You can manage your Unleasheds in the “YOUR UNLEASHEDS” screen. To get there, tap the Unleashed settings icon at the bottom of the app’s menu. 2. Tap the switch next to the Unleashed in order to disable it and temporarily disconnect it from your phone. 3. This […] Read more…
Pairing Initial pairing 1. Plug the Unleashed into the camera, turn it on and open the app (not your phone’s settings). Tap “ADD UNLEASHED”, then “START SEARCHING”. The app will now show you all Unleasheds near you. 2. In the next screen, the app is continuously searching for Unleasheds. Just tap on each Unleashed you […] Read more…
Plugging in the Unleashed N1 1. Plug the Unleashed into the round remote socket in the front. Don’t worry if it’s a little hard to push in at first. The Unleashed is designed to stay on the camera all the time so we made it a tight fit. 2. Move the rubber flap away or […] Read more…