FIRMWARE CHANGELOG

Here are all the changes we’ve made in the latest Firmware versions:

  • Version A 1.2 and B 1.2
    • [fixed] Canon USB initializion bug causing Unleashed not to work at all on 550D, 60D 7D (with old Firmware) and show Error 70 on camera.
    • [fixed] Canon USB initialization bug causing Unleashed not to work at all on 600D, 750D, 5Dmk2 6Dmk2 and other cameras.
    • [fixed] Canon USB implementation bug causing settings flashing available/not available in a loop on 6Dmk2
    • [fixed] Canon USB connection would never work if it failed to initialize on power-on. Failure to initialize could be due to Wifi being enabled in the camera, as this disables USB. Even when Wi-Fi wass disabled later, the Unleashed would not attempt to reinitialize the USB connection.
    • [added] Video recording for D3000 and D5000 series cameras. Was omitted from v1.0 because we can’t show live-view while recording on these cameras. Now starts recording without showing live-view.
    • [fixed] Video recording on newer/higher-end Nikons would stop immediately after starting liveview when GPS was turned on.
    • [fixed] Video errors were reported incorrectly for lower-end Nikon camera
    • [fixed] Video could not be stopped in app when it was started from the camera
    • [fixed] Date and time of the GPS data was in the future after the Unleashed would wake up from powersaving mode in certain conditions. If Setup->GPS->Set camera clock from GPS was active, the camera clock might have been set wrong by this.
    • [added] if GPS was turned on, but the Unleashed is not getting GPS data from the app, the LED will now blink red between its normal colors and sequences, to signal an error. Details to the error will be shown in the App.
    • [fixed] Videos were often not be geotagged.
    • [fixed] Some settings showed wrong errors when the battery is low
    • [fixed] Some settings showed wrong errors when SD card is full
    • [fixed] Wrong errors shown on Nikon D200 when the camera is off
    • [fixed] Video, timelapse and autoramp were not available in app when camera set to BULB / T mode
    • [fixed] Trigger got stuck on Canon cameras when shooting in BULB mode and there was space for exactly one photo left
    • [fixed] Trigger was blocked on Nikon cameras (without USB cable plugged in) because of SD card error even though SD card is formatted/empty.
    • [fixed] Trigger tap in the app sometimes did not end a picture started in T mode (“–” shutter speed) on Nikon D7100
    • [fixed] Auto ISO was not settable on Nikon cameras
    • [fixed] Nikon D4 was reported as D5100
    • [fixed] Nikon Z6/Z7 reported as Unknown (Displayed as N2: 001234 rather than N2: Z6)
    • [fixed] JPG Size could be changed even when quality is set to RAW on Nikon cameras over USB
    • [fixed] Image preview was downloaded twice when secondary slot function was set to Backup, and a second SD card was inserted in applicable Nikon cameras
    • [fixed] Image preview availability was wrong when USB cable is plugged in to the Unleashed, but not to the camera
  • Version 1.0
    • [added] Everything ;-)