The initial pairing is described in the instruction manual of each product. The instructions can be downloaded below. The pairing only needs to be done once at the beginning. From then on the Unleashed’09 remains paired with the GPS receiver even if you change the batteries of the camera or GPS receiver. Unleashed’09 D200+ english […] Read more…
If you have an Unleashed’09 D200+, a MC-DC2 is not necessary to do the pairing. In case you have an Unleashed’09 Dx000 a MC-DC2 remote control is necessary. Read more…
Please check check the FAQ “Pairing doesn’t work. what can I do?” Read more…
Yes, you can do that. Usually you cannot use two Unleashed’09 with only one GPS receiver at the same time (the exception is with a Bad Elf GPS), but you can of course pair two or more Unleasheds’09 with the same GPS receiver and use them separately. Read more…
We provide detailed information on how to pair an Unleashed’09 with a Bluetooth GPS receiver. If you order your Unleashed’09 in our shop together with a GPS receiver you will get them shipped as an already pre-paired bundle. Read more…
No. As long as you don’t set your Bluetooth GPS receiver back on factory settings the Unleashed and the receiver won’t get unpaired. Read more…
It might be that the Unleashed’09 casing is not transparent enough to see the LEDs properly. If you go somewhere darker you should be able to see the LED blinking red and green. If you still don’t see any LEDs blinking please make sure your Unleashed is plugged in properly so the Unleashed gets power […] Read more…
All our Unleashed’09 are tested before they get sent to you. Even though there might be a small chance the Unleashed is broken, please check the following point and retry the pairing routine: Your Unleashed’09 is plugged in the right way – be careful to not have it plugged in upside down. For the Unleashed’09 D200+: […] Read more…